Drain Pan Refurbishment


HVAC Drain Pan Replacement vs Repair – Which is Best?

HVAC Drain Pan Replacement vs Repair – Which is Best? A drain pan is also known as a condensate pan. Condensation from air cooling evaporative coils drips into a pan connected to a PVC pipe that should carry the water out of your home or building. The drip pan can become dirty and rusty. It can crack over the years leading to leaks on the floor of the basement or attic where it is located. […]

HVAC Drain Pan Replacement vs Repair - Which is Best? | SANAIR IAQ

How to Extend the Life of Your HVAC Air Handler with Pancrete! SANAIR IAQ

How to Fix a Leaking A/C Drain Pan With Pancrete!

Pancrete has been around for over a decade. It’s used to stop corrosion and add years to the life of HVAC equipment. Pancrete is also used to refurbish and protect drains pans. Compliant with NFPA 90A, Pancrete provides a water repellant surface and uniform leveling in drain pans, which will prevent water buildup. Pancrete will also improve the structural integrity of drain pans because it seals existing leaks for good. How to Fix a Leaking […]


How to fix a leaking A/C drain pan with Pancrete!

Pancrete has been around for over a decade. It’s used to stop corrosion and add years to the life of HVAC equipment. Pancrete is also used to refurbish and protect drains pans. Compliant with NFPA 90A, Pancrete provides a water repellant surface and uniform leveling in drain pans, which will prevent water buildup. Pancrete will also improve the structural integrity of drain pans because it seals existing leaks for good. How to Fix a Leaking […]

How to fix a leaking A/C drain pan with Pancrete! | SANAIR IAQ

HVAC Drain Pan Repair and Refurbishment: What You Need to Know! | SANAIR IAQ

HVAC Drain Pan Repair and Refurbishment: What You Need to Know!

HVAC Drain Pan Repair – Water leaks from HVAC units are usually due to holes in one of the drip pans or from a clogged drain. What happens is the drain becomes blocked, allowing water to accumulate in the drain pan. Over a period of time, this standing water causes corrosion and leaks develop. Water leaking from HVAC units installed in the attic or basement is messy and causes secondary damage, so it’s essential HVAC […]


Specialty Coating Systems to Prevent Moisture Damage

Corrosion can cause all kinds of problems, whether it’s rust on an exterior metal door or the disintegration of the drain pan in your HVAC system. Without the proper care and treatment, any metal surface is susceptible to the loss of integrity and degradation that comes with exposure to oxidizing agents like moisture and oxygen. Fortunately, there are effective coating systems to protect metal surfaces that are found in residential, factory, commercial, and office buildings. […]

Specialty Coating Systems to Prevent Moisture Damage | SANAIR IAQ